Specification
| Condenser | Fin and tube forced air cooling |
| Current | 22A |
| External Dimensions | 1080x1200x660 mm (HxLxW) |
| Fan output | 0.14 kW |
| Optical System Circulating water | Deionized water |
| Optical System Construction | Tube heat exchanger |
| Optical System Cooling Capacity | 1 kW |
| Optical System discharge pump construction | Multi stage centrifugal type |
| Optical System discharge pump output | 0.65 kW |
| Optical System material | Cu |
| Optical System Operating Flow Rate | 20 l/min (0.4mpa) |
| Optical System Operating pressure | 0.5 MPa or lower |
| Optical System Operating Temperature | 24-40 deg C (oscillator water temp. setting +5 deg C or higher) |
| Optical System Temperature Precision | +/- 1 deg C (when load is stable) |
| Optical System Water tank capacity | Approx. 27 L |
| Oscillator Circulating water | Clean water |
| Oscillator discharge pump construction | Centrifugal type |
| Oscillator discharge pump output | 0.75 kW |
| Oscillator evaporator Construction | Plate type |
| Oscillator evaporator material | SUS316 (Brazing Cu) |
| Oscillator Operating Flow Rate | 28 l/min (0.5mpa) |
| Oscillator Operating pressure | 0.5 MPa or lower |
| Oscillator Temperature Precision | +/- 1 deg C (when load is stable) |
| Oscillator Temperature range | 10-35 deg C |
| Oscillator Water tank capacity | Approx. 20 L |
| Power Consumption | 5.5 kW |
| Power Supply | 400V +/-10%,50Hz,3Ph |
| Power Supply Capacity | 8.7 kVA |
| Refrigerant | R410A |
| Refrigeration compressor | 1.8 kW |
| Used In | Fiber Laser |
| Model | GKL2202A-V |
| Brand | Gem Orion |
| Cooling Capacity | 7.7 kW |